Forum Settings
       
Reply To Thread

how to get engi from 363 to 375 ; ;Follow

#1 Jan 29 2008 at 3:25 AM Rating: Decent
Hello there, i have got engi to 363 and i am aiming to get to 375 to craft my gun. The problem is, i don't see how to make it. Anyone could tell me what should i craft in this range to get to 375? Anyone have a tip?



Thank you.
#2 Jan 29 2008 at 6:08 AM Rating: Decent
Top of my head, and thinking solely of utility, not novelty:

Get your consortium rep up and start churning out Elemental Seaforium Charges. All mats available from Vendors. Used by other lazy engineers as a component in the Flying Mount. If they don't sell then you are now a very expensive rogue.

2 Khorium Power Cores for use in your Epic Roflcopter.

Take your Roflcopter up to Blades Edge Mountains and drop the Repairbot schematics from the Analysts (? - The short demon engineers) from the place with the shards that light up ( Just to the north of the Skybase, before you enter the forgecamp proper) If you kill more than 10 and it doesn't drop, then you've chosen the wrong mobs. Churn out the robots for your guild runs. They'll love you for it.
#3 Jan 29 2008 at 6:17 AM Rating: Good
***
1,574 posts
All the materials for Adamantite Rifles may be bought from vendors in Netherstorm. Craft those plus the Khorium Power Cores and Felsteel Stabilizers you'll need for your epic mount, tanking gun and tanktronic goggles to get to 370. Then craft your goggles and four of the regular mounts.
#4 Jan 29 2008 at 7:59 AM Rating: Decent
I plan on making khorium scopes to 375... 360-375 is the worst trade skill grind I've ever done, it might give the thorium stage of jewelcrafting a run for its money.
#5 Jan 29 2008 at 8:46 AM Rating: Decent
***
1,225 posts
If you're planning on making the Khorium Scopes, I have one piece of advice for you: make sure you grind the right Sunfury Archers.

There are two sets of archers - one set is by the Manaforge and one is outside a separate building to the northeast of the Manaforge. I spent a couple of hours grinding the ones outside that separate building and came up fruitless. Then I spotted the others while flying over and BINGO, the schematic dropped from the second one I killed.

So I'm guessing the archers in the two locations have different loot tables and the schematic is only available from the ones by the Manaforge.

@ the OP: I made the Felsteel Boomstick and the Field Repair Bot 110G. Both schematics come from mobs in Blades Edge Mountains.
#6 Jan 29 2008 at 9:15 AM Rating: Decent
I got my design yesterday after about 15-20 minutes of farming.
#7 Jan 29 2008 at 1:36 PM Rating: Decent
***
1,305 posts
This could help.

Edited, Jan 29th 2008 2:37pm by fuzzzywuzy
#8 Feb 04 2008 at 12:03 PM Rating: Decent
22 posts
I made about 4 or 5 (stacks) of the robots and tucked them away in the bank for future raid/heroic use and grinded a hour for khorium scope which on my server mats sell for the same or maybe a little less than the scope sells for. I was about broke at the time so just: bought mats-crafted-sold-repeat.
#9 Feb 13 2008 at 8:46 AM Rating: Good
**
801 posts
Yeah the Khorium Scopes are the best "gonna hit 375" way to go.

I was leveling my husbands engineering and another tank was leveling it at the same time, and started at a much much higher level then me. I ended up finishing about 5 days AND 500g ahead of him in hitting 375.

To me the more expensive mat cost of the scope is off set by it's ability to sell (only lost about 20g each) and the fact you will get a skill point off of it.

The other tank used.... Adamantite Rifles I believe. Based on the DE price and the cost of the mats AND not a "gonna get it" skill point, he ended up having to make almost 40 of them before he was finished.
#10 Feb 13 2008 at 8:56 AM Rating: Decent
Well for me, my engineer is my hunter so I just squirrel away the scopes for personal use :)
Reply To Thread

Colors Smileys Quote OriginalQuote Checked Help

 

Recent Visitors: 16 All times are in CST
Anonymous Guests (16)